TP-Link Deco X10 (3 pack) home Mesh Wifi system

Faster connections: Wi-Fi 6 speeds up to 1500 Mbps—1201 Mbps at 5 GHz and 300 Mbps at 2.4 GHz.
Connect more devices: OFDMA and MU-MIMO technologies quadruple the capacity to enable simultaneous transmission to multiple devices.
Enhanced seamless coverage: Achieve seamless coverage throughout your home with a clearer and stronger Wi-Fi signal for your entire home, created by Wi-Fi 6.
Extremely low latency: Greater latency reduction enables more responsive gaming and video chatting.
One unified network: Multiple units form a whole-home network that automatically selects the best connection as you move around your home.
Robust parental controls: Limit online time and block inappropriate websites according to unique profiles you create for each family member.
Easier setup than ever: The Deco app guides you through the setup step by step.

WIRELESS
Wi-Fi 6 standards
IEEE 802.11ax/ac/n/a 5 GHz
IEEE 802.11n/b/g 2.4 GHz
WiFi speeds AX1500
5 GHz: 1201 Mbps (802.11ax)
2.4 GHz: 300 Mbps (802.11n)
1-2 bedroom cottages WiFi Range (1 package)
2-4 bedroom houses (2-pack)
Houses with 3-5 bedrooms (3-pack)
TP-Link Mesh Technology
Optional Ethernet backhaul works together to connect Deco units for seamless coverage
2× antennas (internal)
Multiple antennas form an array to boost the signal, covering multiple directions and large areas
Beamforming
Focuses wireless signal strength on clients to extend WiFi range
High WiFi performance
Dual band
Distribute devices across different bands for optimal performance
2×2 MU-MIMO
Communicates with multiple clients simultaneously MU-MIMO
OFDMA
Communicates with multiple WiFi 6 clients simultaneously
4 streams
More than enough bandwidth for connected devices
Operating modes Router mode
Access point mode


securitySPI network security Firewall
Access control
Guest network
1 × 5 GHz guest network
1 × 2.4 GHz guest network
WiFi encryption WPA-Personal
WPA2-Personal
WPA3-Personal

HARDWARE
Ethernet ports
2× Gigabit ports
*Per Deco unit
Supports automatic WAN/LAN detection
Buttons Reset button

SOFTWARE
Protocols IPv4
IPv6
Parental control Parental control
Custom profiles
Professional content filter library
Family time
Bedtime
Off Time
Time rewards
Family online time scale
Stop the Internet
Weekly and monthly reports
WAN Types Dynamic IP
Static IP
PPPoE
PPTP
L2TP
Quality of Service (QoS) based on device
OTA firmware upgrade service in the cloud
TP-Link ID
DDNS
NAT forwarding Port forwarding
UPnP
IPTV IGMP proxy
IGMP snooping
Bridge
VLAN tagging
DHCP address reservation
DHCP client list
Server
TP-Link DDNS
Deco management app

TEST DATA
WiFi transmission power CE:
<20 dBm (2.4 GHz)
<30 dBm (5 GHz)
FCC:
<30 dBm (2.4 GHz)
<30 dBm (5 GHz)

PHYSICAL
Dimensions (W × D × H) 4.33 × 4.33 × 4.49 in
(110 × 110 × 114 mm)
Package contents Deco X10 (3-pack)
3 Deco X10 units
1 RJ45 Ethernet cable
3 power adapters
Quick installation guide
Deco X10 (2-pack)
2 Deco X10 units
1 RJ45 Ethernet cable
2 power adapters
Quick Setup Guide
Deco X10 (1 pack)
1 Deco X10 unit
1 RJ45 Ethernet cable
1 power adapter
Quick Start Guide

OTHER
System requirements Android 5.0 or later
iOS 9.0 or later
*Note: Minimum system requirements will be updated along with app updates, depending on information from the official website.
Certificates CE, FCC, RoHS, JPA, JRF, VCCI, NCC, BSMI
Operating temperature: 0℃~40℃ (32℉ ~104℉)
Storage temperature: -40℃~60℃ (-40℉ ~140℉)
Operating humidity: 10%~90% non-condensing
Storage humidity: 5%~90% non-condensing