TP-LINK Tapo C420 2K QHD Outdoor Wi-Fi Security Camera

2K QHD—Now with 1.7 times more pixels than 1080p, delivering clearer videos and photos.
180-day battery life*—A rechargeable and removable battery with low-power protocol extends your usage.
Full-color night vision—Reveal high-resolution details and colors at night with the starlight sensor.
Smart AI detection and notification – Smart AI identifies people, pets, and cars and notifies users when necessary.
Wireless setup – Wireless means you can place cameras almost anywhere indoors or outdoors – whatever suits you!
Light and sound alarm – when motion is detected, it triggers a sound and light alarm.
Two-way audio - Allows communication via the built-in microphone and speaker.
Flexible storage options - Save recorded videos to a microSD card installed in the hub (up to 512 GB) or using Tapo Care cloud storage services.
IP65 water and dust resistant - Offers excellent water resistance and dust protection for outdoor scenarios.

CAMERA
Image sensor 1/3" CMOS Starlight sensor with progressive scan
Lens focal length: 3.2 mm
Aperture: F1.6
Field of view: 113° (diagonal), 97° (horizontal), 54° (vertical)
Night vision 850 nm IR LED (49 ft / 15 m)
Full-color night vision
Illumination 2× Built-in reflectors
Interface & Button 1× SYNC/RESET button
Hub compatibility Compatible with Tapa H200 (sold separately)
VIDEO & AUDIO
Maximum resolution 2K QHD 4 MP (2560 × 1440 pixels)
Frame rate 15 fps / 20 fps
Digital zoom 12×
Video compression H.264
Live view Yes
Image enhancement 3DNR
WDR
Audio input and output Built-in microphone and speaker
Audio communication Two-way audio with noise cancellation
Camera siren volume:
92 dB (Level measured at a distance of 4 inches/10 cm)
Center:
100 dB (Level measured at a distance of 4 inches/10 cm)
STORAGE
Local storage MicroSD card slot on the starboard side (up to 512 GB)
* Pesto sold separately.
General information about using MicroSD cards >
Tapo Care cloud storage services (subscription required)
DETECTION AND NOTIFICATION
Sensor Single motion sensor (FOV: 110° horizontal)
Single ambient light sensors
AI detection Motion detection
Person detection
Pet detection
Vehicle detection
Activity zones Yes
Output notification System notification
System notification with recording (Tapo Care Services)
NETWORK
Network connectivity Connect via Wi-Fi or Ethernet
Wireless connectivity IEEE 802.11b/g/n, 2.4 GHz Wi-Fi
Sub-1G, 868MHz or 922MHz (Used for local connection between camera and hub)
Ethernet port 1 × 10/100 Mbps RJ45 port on the hub
* Pesto sold separately.
SECURITY
Security 128-bit AES encryption with SSL/TLS
WPA/WPA2-PSK
POWER
Camera with power source:
6700 mAh removable rechargeable lithium-ion battery
Optional solar panel: Tapo A200 (sold separately)
Input voltage: Camera battery adapter: 100–240 V, 50/60 Hz
Camera battery adapter output voltage Output: 5.0 V, 1.0 A
GENERAL
Smart integration Google Assistant, Amazon Alexa
Weatherproof camera: IP65
System requirements Tapo App: iOS 11.0 or later, Android 5.0 or later
Installation options On a table
Ceiling mount
Wall
Camera operating temperature: -20℃ ~ 45℃
Storage temperature -20 ℃ ~ 60 ℃
Operating humidity 10%~90% RH, non-condensing
Storage humidity 5%~90% RH, non-condensing
Charging temperature 0-55 ℃
Dimensions: Camera dimensions: 4.35 × 2.52 × 2.52 in (110.6 × 64.2 × 64.2 mm)
Package contents Tapo C420 camera
Tapo A100 battery
USB adapter
USB adapter cable
Mounting anchors
Mounting screws
Mounting template
Camera mount
Quick start guide
CE, FCC, RoHS, RCM certifications